Specifications

MAINTENANCE
Page 76 90-860168040 JANUARY 2004
0150
Engine Coupler
1. Lubricate engine coupler splines through grease fittings on coupler by applying
approximately 8-10 pumps of grease from a typical hand-operated grease gun.
NOTE: If the boat is operated at idle for prolonged periods of time, coupler should be
lubricated Alpha Models - every 150 hours.
71569
a
A
a-Engine coupler grease fitting
Description
Where used Part number
A Engine Coupler Spline Grease Coupler 92-802869A1
NOTE: Alpha Models - Your power package is equipped with a sealed engine coupler and
Perm-a-Lube U-joints. The sealed coupler and shaft splines can be lubricated without
removing the sterndrive unit. The Perm-a-Lube U-joints do not require lubrication.