Specifications

MAINTENANCE

90-860168040 JANUARY 2004 Page 79

0200.01

Drive Belts

WARNING

Avoid possible serious injury. Make sure engine is shut off and ignition key is

removed before inspecting belt.

71428

a-Power steering pump pulley

b-Water circulating pump pulley

c-Crankshaft pulley

d-Alternator pulley

Checking

1. Inspect the drive belt for proper tension and for the following:

• Excessive wear

• Cracks

NOTE:

Minor, transverse cracks (across the belt width) may be acceptable. Longitudinal

cracks (in the direction of belt length) that join transverse cracks are not acceptable.

• Fraying

• Glazed surfaces

• Proper tension - specified deflection, with moderate thumb pressure, on the belt at

the location that has the longest distance between two pulleys.

Description

Specification

Deflection 6 mm (1/4 in.)