Specifications

MAINTENANCE
Page 80 90-860168040 JANUARY 2004
201.01
Replacing - Front Mount Models
POWER STEERING PUMP DRIVE BELT, IF EQUIPPED
1. Loosen power steering pump attaching bolts and mounting bolts.
2. Pivot power steering pump toward engine, as required, until belt can be removed.
3. Install new drive belt on pulleys. Adjust tension.
50633
a
d
c
b
a-Power steering belt
b-Spacer block
c-Alternator
d-Alternator belt
ALTERNATOR BELT
1. Remove power steering belt, if equipped.
2. Remove the 2 PORT side, front engine mount bracket assembly screws and washers.
3. Remove the spacer block between the bracket assembly and the engine block. It may
be necessary to tap gently on the spacer to allow removal.
4. Loosen the alternator. Remove and replace the alternator belt.
5. Replace the spacer block between the bracket assembly and the engine block. Install
the 2 screws using the flat and lockwashers removed previously. Torque the 2 spacer
block screws.
Description Nm lb-in. lb-ft
Spacer block screws 28 21
6. Install power steering belt, if equipped. Adjust tension of both drive belts.
Description Specification
Deflection 6 mm (1/4 in.)