Specifications

MAINTENANCE
90-860168040 JANUARY 2004 Page 81
202.01
Replacing - Side Mount Models
POWER STEERING PUMP DRIVE BELT, IF EQUIPPED
1. Loosen power steering pump attaching bolts and mounting bolts.
2. Pivot power steering pump toward engine, as required, until belt can be removed.
3. Install new drive belt on pulleys. Adjust tension as outlined in the following.
ALTERNATOR BELT
1. Remove power steering pump drive belt, if equipped.
2. Loosen the alternator. Remove and replace the alternator belt.
3. Install power steering belt, if equipped. Move the power steering brace to its original
position and adjust tension of both drive belts.
Description Specification
Deflection 6 mm (1/4 in.)