Specifications

38
CB826
Operation Chart
BEFORE STARTING AFTER STARTING WHILE UNDERWAY AFTER STOPPING
Open engine hatch.
Observe all gauges to
check condition of
engine. If not normal,
stop engine.
Observe all gauges to
check condition of
engine. If not normal,
stop engine.
Turn ignition key to OFF.
Turn battery switch ON, if
equipped.
Check for fuel, oil, water,
fluid and exhaust leaks.
Listen for audio warning
horn signifying Guardian
Mode.
Turn battery switch OFF,
if equipped.
Operate bilge blowers, if
equipped.
Check shift and throttle
control operation.
Close fuel shutoff valve.
Open fuel shutoff valve.
Check steering
operation.
Close seacock, if
equipped.
Open seacock, if
equipped.
Flush cooling system if in
saltwater.
Place drive unit in full
DOWN/IN position.
Open air actuated drain
system if boat is out of
water or seacock is
closed.
Close air actuated drain
system.
Perform all other checks
specified by your dealer
and/or boat builder.
Listen for Audio Warning
Alarm to sound when the
ignition switch is in the
ON position.
INDEX