Specifications

59
CA820
INSTALLATION
1
2
4
5
7
77107
6
3
1 Apply a liberal coat of one of the following Quicksilver lubricants to both propeller shafts: Special Lubricant
101, 2-4-C Marine Lubricant with Teflon, or Anti-Corrosion Grease.
2 Slide forward thrust hub onto propeller shaft, with tapered side toward propeller hub (toward end of shaft).
3 Align splines and place propeller on propeller shaft.
4 Install propeller nut. Tighten nut securely. A minimum of 100 lb-ft (136 Nm) torque is required. Check
propeller at least after 20 hours of operation. Do not operate with loose propeller.
5 Slide aft thrust hub onto propeller shaft, with tapered side toward propeller hub (toward end of shaft).
6 Align splines and place propeller on propeller shaft.
7 Install propeller nut. Tighten nut securely. A minimum of 60 lb-ft (81 Nm) torque is required. Check propeller
at least after 20 hours of operation. Do not operate with loose propeller.
INDEX