User`s manual

Mainboard User’s Manual
Install the Mainboard
Install the mainboard in a system chassis (case). The board is an
ATX size mainboard with a twin-tier of I/O ports. You can install
this mainboard in an ATX case. Ensure that your case has an I/O
cover plate that matches the ports on this mainboard.
Install the mainboard in a case. Follow the instructions provided by
the case manufacturer using the hardware and internal mounting
points on the chassis.
1
A
UDIO1
PW1
1
PANEL1
CHS FAN
PLED1
1
SPKR1
1
Connect the power connector from the power supply to the PW1
connector on the mainboard.
If there is a cooling fan installed in the system chassis, connect the
cable from the cooling fan to the CHS FAN fan power connector
on the mainboard.
Connect the cable from the PC speaker to the SPKR1 header on
the mainboard.
Pin Signal Pin Signal
1 SPKR 2 NC
3 GND 4 +5V
14