User`s manual

Mainboard User’s Manual
Hardware Monitor Page
This page sets up some parameters for the hardware monitoring
function of this mainboard.
AMIBIOS SETUP – HARDWARE MONITOR
(C) 2000 American Megatrends, Inc. All Rights Reserved
*** System Hardware ***
Vcore 1.728 V
Vcc 3.3V 3.312 V
Vcc 5.030 V
+12V 12.045V
-12V -12.071V
-Vcc -5.026V
SB5V 4.800 V
VBAT 3.248 V
SYSTEM Fan Speed 0 RPM
CPU Fan Speed 3629 RPM
SYSTEM Temperature 28°C/82°F
CPU Temperature 59°C/138°F
ESC : Quit ↑↓←→ : Select Item
F1 : Help PU/PD/+/- : Modify
F5 : Old Values (Shift)F2 : Color
F6 : Load BIOS Defaults
F7 : Load Setup Defaults
CPU / System
Temperature
These items display CPU and system
temperature measurement.
FANs &
Voltage
Measurements
These items indicate cooling fan speeds in
RPM and the various system voltage
measurements.
Change Password
If you highlight this item and press Enter, a dialog box appears that
you can enter a Supervisor password. You can enter no more than
six letters or numbers. Press Enter after you have typed in the
password. There will be the second dialog box asking you to retype
the password for confirmation. Press Enter after you have retyped
it correctly. Then, the password is required for the access to the
Setup Utility or for it at start-up, depending on the setting of the
Password Check item in Advanced Setup.
Exit
Highlight this item and press Enter to save the changes that you
have made in the Setup Utility configuration and exit the program.
When the Save and Exit dialog box appears, press Y to save and
exit, or press N to exit without saving.
34