User`s manual

Mainboard User’s Manual

Installing under Windows NT or Manual Installation

If you are under Windows NT, the auto-installing program doesn’t

work out; or you have to do the manual installation, please follow

this procedure while the Auto Setup screen pops out after inserting

the support CD-ROM:

1. Click the ReadMe to bring up a screen, and then click the

Install Path at the bottom of the screen.

2. Find out your mainboard model name and click on it to obtain

its correct driver directory.

3. Install each software in accordance with the corresponding

driver path.

Bundled Software Installation

All bundled software available on the CD-ROM is for users’

convenience. You can install bundled software as follows:

1. Click the Application button while the Auto Setup screen pops

out after inserting the support CD-ROM.

2. A software menu appears. Click the software you want to install.

3. Follow onscreen instructions to install the software program step

by step until finished.