User`s manual

1: Introduction

Chapter 1

Introduction

This mainboard has a Socket-478 support for Intel Pentium4

processors with front-side bus (FSB) speeds up to 400 MHz

This mainboard has the Intel 845GL chipset that contains Intel

82845 Memory Controller Hub and Intel 82801 I/O Controller

Hub. It supports built-in USB 2.0 providing higher bandwidth.

It implements Universal Serial Bus Specification Revision 2.0

and is compliant with UHCI 1.1 and EHCI 0.95. This mainboard

supports AC 97 audio codec and provides Ultra DMA 33/66/100

function. This mainboard has two 32-bit PCI, one AGP1 (with

Digital Video Output, but without AGP support) and one CNR

(Communications and Networking Riser) slot. There is a full set of

I/O ports including two PS/2 ports for mouse and keyboard, one

serial port, one VGA port, one parallel port, one MIDI/game port

and maximum six USB ports(USB 2.0): two back-panel USB ports

and you can make four extra USB ports by connecting the

extended USB module to the mainboard.

This mainboard is an Micro ATX mainboard that uses a 4-layer

printed circuit board and measures 244 x 244mm.