User`s guide

23
Chapter 3: BIOS Setup Utility
OnBoard SATA-IDE
Use this item to enable the onboard SATA-IDE channel.
Audio Device
This item enables or disables the AC’97 audio chip.
Modem Device
This item enables or disables the onboard Modem.
Ethernet Device
This item enables or disables the onboard Ethernet LAN.
OnBoard USB Function
Enable this item if you plan to use the USB ports on this motherboard.
USB Function For DOS
Enable this item if you plan to use the USB ports on this motherboard in a DOS
environment.
Power Management Setup Page
This page sets some parameters for system power management operation.
CMOS SETUP UTILITY – Copyright (C) 1985-2003, American Megatrends, Inc.
Power Management Setup
ACPI Aware O/S
Power Management
Suspend Mode
Suspend Time Out
Resume On RTC Alarm
LAN/Ring Power On
Keyboard Power On
Wake-Up key
Help Item
Enable / Disable
ACPI support for
Operating System.
Enable: If OS supports
ACPI.
Disable: If OS does not
support ACPI.
: Move Enter: Select +/-/: Value F10: Save Esc: Exit
F1: General Help F9: Optimized Defaults
Yes
Enabled
S1
Disabled
Disabled
Disabled
Disabled
Any key
ACPI Aware O/S
This item supports ACPI (Advanced Configuration and Power management
Interface). Use this item to enable or disable the ACPI feature.
Power Management
Use this item to enable or disable a power management scheme. If you enable
power management, you can use the items below to set the power management
operation. Both APM and ACPI are supported.
Suspend Mode
This item selects the status S1(Stop Clock) or S3(Suspend to RAM) when the
system enters the power-saving Suspend mode.