Owner`s manual

MAINTENANCE

Painting Drive Unit or Transom Assembly

• Paint the drive unit and transom assembly with a good

quality marine paint or an anti‑fouling paint that does not

contain copper, tin, or any other material that could conduct

electrical current. Do not paint drain holes, anodes, or items

specified by the boat manufacturer.

Additional Corrosion Prevention Tips

• Spray the power package components on the inside of the

boat every two to three weeks with Corrosion Guard to

protect the finish from dulling and corrosion. External

power package components may also be sprayed.

Tube Ref No. Description Where Used Part No.

120

Corrosion Guard Power package

92-802878-5

• All lubrication points, especially the steering system and

shift and throttle linkages, should be kept well lubricated.

• Flush the raw water portion of the cooling system after each

use.

Battery

All lead acid batteries discharge when not in use. Recharge every

30 to 45 days, or when specific gravity drops below battery

manufacturer's specifications.

Refer to specific instructions and warnings accompanying your

battery. If this information is not available, observe the following: