Owner`s manual

OPERATION
35
4. The power trim pump is internally protected from thermal
overload. If it overheats, it will shut off, allowing itself to cool
and then reset. However, it is recommended that the power
trim system be installed with additional overload protection.
Therefore, the power trim may be protected from overload by
a 90 amp fuse in the power supply to the pump and a 20 amp
in‑line fuse to the switch power.
5. A 90 amp fuse is located on the starter.
10309
b
a
c
a - Positive (+) battery cable
b - 90 amp fuse
c - Starter