Owner`s manual

OPERATION

FLOODED ENGINE

Move control/throttle lever to half throttle. Be prepared to decrease

engine speed to 1000 ‑ 1500 RPM as soon as engine starts.

STARTING PROCEDURE

1. Turn the key switch to "START." Release the key when the

engine starts and allow the switch to return to the "RUN"

position.

2. Check the oil pressure gauge immediately after the engine

starts. If oil pressure is not within the specified range, see

Specifications, stop the engine immediately, and determine

cause.

3. If the engine is cold, make sure the engine is idling smoothly

before operating the boat.

4. After the engine has warmed up, check the water temperature

gauge to ensure that the engine temperature is not abnormally

high. If it is, stop the engine immediately and determine cause.

5. Ensure that the charging system is functioning correctly.

6. Observe the power package for fuel, oil, water, and exhaust

leaks.

Operation Chart

Before Starting

Open the engine hatch.

Turn battery switch "ON," if equipped.

Operate bilge blowers, if equipped.

Open fuel shut off valve.

Open seacock, if equipped.

Perform all other checks specified by your dealer and/or

boat builder.

After Starting

Observe all gauges to check condition of engine. If not

normal, stop engine.

Check for fuel, oil, water, fluid and exhaust leaks, etc.

Check shift and throttle control operation.