Owner`s manual

MAINTENANCE
55
DRY SUMP SIX DRIVE MAINTENANCE SCHEDULE
Interval Task
Check prior to use and every 3 hours
of operation.
Drive, Transom, and Propeller ‑ Inspect.
Lower Gear Housing Oil ‑ Check level.
Power Trim Pump Oil ‑ Check level and
for any water contamination. Replace if
necessary.
Anodes ‑ Inspect for erosion.
Initial break‑in at 25 hours. Drive ‑ Change Oil and filter
Every 25 hours of operation or every
90 days, whichever occurs first.
Tie‑bar Mounting Bracket Nuts ‑ Inspect
and tighten to specifications as needed.
Propeller Shaft ‑ Lubricate.
Propeller Nut ‑ Retighten.
Anodes ‑ Inspect for erosion.
Sterndrive ‑ Inspect, clean, and spray with
rust preventative.
Every 50 hours of operation.
Perform 25 Hour Maintenance Items.
Drive Mounting Nuts ‑ Tighten to
136 Nm (100 lb. ft.)
Steering System ‑ Inspect for loose,
damaged or missing parts. Lubricate the
steering cylinder pivot points.
Every 100 hours of operation or
annually, whichever occurs first
Peform 25 and 50 Hour Maintenance
Items.
Drive Unit Bellows and Clamps ‑ Inspect.
Sterndrive Unit Input Splines (Internal
and External) ‑ Lubricate with Optimol
Paste White T Grease.
Drive Input Shaft U‑joints ‑ Lubricate.
Drive ‑ Change Oil
1.
Transom Input Shaft Bearing Housing ‑
Change the oil.
1.
1. Severe duty requires more frequent service.