Owner`s manual

MAINTENANCE
68
9. Stop the engine, shut off the water and check the transmission
oil level with the dipstick. If additional oil is required, add it
through the dipstick tube to bring the level up to the "FULL"
mark.
a
b
FULL
c
6790
a - Dipstick
b - "FULL" mark
c - Dipstick tube
Tube Ref No. Description Where Used Part No.
Type F or FA
Transmission Fluid
Transmission
Obtain
Locally
CHANGING DRIVE UNIT GEAR LUBE
IMPORTANT: Use only Torco MTF Gear Oil in drive unit.
1. Remove propeller, place drive unit so propeller shaft is level.
2. Remove fill/drain screw and sealing washer, and vent screw
and sealing washer from gear housing.
IMPORTANT: If any water drained, or if gear lube appears milky,
the drive unit is leaking and should be checked immediately by
your authorized Mercury MerCruiser Dealer.