Owner`s manual

MAINTENANCE

CHANGING TRANSOM INPUT SHAFT BEARING HOUSING

GEAR LUBE (DRIVE-LINE MODELS)

1. Remove 3 pipe plugs from the transom input shaft bearing

housing. Allow gear lube to drain completely.

12868

a - Top pipe plug (Fill)

b - Middle pipe plug (Check level)

c - Bottom pipe plug (Drain)

Tube Ref No. Description Where Used Part No.

Torco MTF Gear Oil Input shaft housing

Obtain

Locally

2. Re‑install bottom pipe plug.

3. Fill the input shaft housing with Torco MTF Gear Lube through

the top plug opening until gear lube flows from the middle plug

opening.

4. Install the pipe plugs into the transom input shaft bearing

housing.

WARNING

Avoid damage to the sterndrive assembly. Do not overfill the

Dry Sump Six (VI) Drive.