Owner`s manual

MAINTENANCE

3. Install the pipe plugs into the input shaft housing and tighten

securely.

CHECKING DRIVE UNIT GEAR LUBE

WARNING

Avoid damage to the sterndrive assembly. Do not overfill the Dry

Sump Six (VI) Drive.

IMPORTANT: Fill the dry sump drive with TORCO MTF Gear Oil.

NOTE: The Dry Sump Six Drive is filled with Torco MTF Gear Oil

at the factory. Check the drive unit gear oil level before and after

the first sea trial.

1. Remove the upper vent plug from the gearcase. Ensure that

the gear lubelies at the bottom of the vent plug hole with the

propeller shaft level.

7429

150

a - Top vent screw

b - Fill/drain screw

2. If gear lube level is low, remove the lower fill plug from the

gearcase and fill until gear lube comes out of the top vent plug

opening.

3. Install the upper vent plug.

4. Remove filler tube and install the lower fill plug.