Specifications
The inputs are directly routed to the outputs.
Preset Sections
A-B Sections
A plug-in features two preset sections: A & B. Clicking on the slot of a specific section reaches the preset management
window. The main display is now a preset list in which you can select the preset you want to recall or save in the specific
preset section. Two different presets must be used if you plan to use the morphing capability of FLUX Plug-in.
Save
Save replaces the selected preset by a new one under the same name featuring the current settings. If you want to keep an
existing preset without your new modifications, just select an empty place into the preset list, enter a new name for this
modified preset featuring the current settings and press Save.
Recall
Once a preset is selected from the preset list it must be explicitly loaded into section A or the section B by using the recall
button.
A preset is effective only after it has been recalled.
Copy A Copy B
The current parameters of a section are copied to the other one. The section A or B is re-initialized with the current values
and the morphing slider is parked at 100% of the corresponding section.
AB Slider
This horizontal slider has no unity nor specific value display. It allows to morph current settings between two loaded presets.
Double-click on one side of the slider area toggles between full A and full B settings. The results of an in-between setting can
be saved as a new preset.
A global preset including the two loaded presets and the morphing slider position can also be saved from preset
management window.
Automation
Default Value: Off
When writing automation, if this button is engaged, ONLY the morphing slider value is recorded. No other parameter is
recorded.
When this button is engaged, ONLY the morphing slider value is applied when reading automation.
When this button is disabled, all the plug-in parameters values are recorded when writing automation. The morphing slider is
ignored.
When reading automation, if this button is disabled, all the plug-in parameters are controlled by the host automation except
6
101
6