Specifications

It can also be done from the main display area.
Number of Band Control (27)
The Minus and Plus buttons allow to specify the number of frequency bands of the Alchemist from 1 to 5.
Reset Solo (21)
This button disables all engaged band solo.
General Display
Windows: Right-Click
on the selected band accesses a specific contextual menu allowing to reset band(s) or copy the
band parameters to another band. An Auto Solo feature can be accessed when pressing the
Ctrl
key +
Click
on the desired
band.
MacOS: Right-Click
or
Ctrl + Click
on the selected band accesses a specific contextual menu allowing to reset band(s) or
copy the band parameters to another band. An Auto Solo feature can be accessed when pressing the
Command (Apple)
Key +
Click
on the desired band.
Input Peak Meter (10)
RMS Level Meter (11)
Vu-meters referenced to -16 dB Fs by default.
The up red line reflects the input signal.
The down red line reflects output signal
Output Peak Meter (12)
Output FFT Curve (13)
Auto Scale depending of the output signal. Maximum and minimum values (14) are displayed when the cursor is in the upper
part of the display area.
Link display (19)
The bands can have their parameters linked.
Right-Click
on the main display allows access to a contextual menu. Modifying
a setting of a linked band also modifies this setting for all linked bands.
Band Gain Handle (16)
The band display reflects both input and out gains.
The handle trims the output gain.
Shift + Click
trims the input gain.
Double-Click
reset the output gain to the default value.
4.2 Alchemist The Parameters
17
4