Specifications

4.2.2.3 Dynamic Sections Settings and Display

Every band features four dynamic sections working is parallel.

Alt + Click

temporarily unlink the control when the band is linked.

Dynamic Sections Settings:

Peak Detection Amount (61)

Unit: % - Value Range: 0 / 100 - Step: 1

Default Value: 0 %

Instant peak value can be added to the RMS signal feeding the detector section, making the dynamic processing more

sensitive to audio transients.

Angel's Share (62)

Unit: % - Value Range: 0 / 100 - Step: 1

Default Value: 0 %

This setting relaxes the ratio applied to the processor section when the detected signal dynamic raises.

This setting literally opens the sound, increases the dynamic impression and keeps some crest by adjusting in real time the

ratio of every dynamic processing section regarding both their current settings about ratio and the signal content (mainly

dynamic range). To start understanding this setting and easily hear it, take a full mixed drum kit or a complete mix with

punchy drums, set the compression threshold, ratio to get something near pumping or an aggressive compression. Then

increase the output gain to compensate the gain lost and then toggle between 0 and 100% of Angel Share. At 100 % you

should hear more air in the sound, more transient and less compression impression; especially in terms of attack.

Angel's Share Inverter (63)

When engaged, the behavior of the Angel's Share is inverted. The ratio value is increased depending of the detected signal

dynamic.

Hysteresis (64)

Unit: % - Value Range: 0 / 100 - Step: 1

Default Value: 0 %

4.2 Alchemist The Parameters