Specifications

Save (25)
Save replaces the selected preset by a new one under the same name featuring the current settings. If you want to keep an
existing preset without your new modifications, just select an empty place into the preset list, enter a new name for this
modified preset featuring the current settings and press Save.
Recall (26)
Once a preset is selected from the preset list it must be explicitly loaded into section A or section B by using the recall
button.
A preset is effective only after it has been recalled.
Copy A Copy B (27)
The current parameters of a section are copied to the other one. The section A or B is re-initialized with the current values
and the morphing slider is parked at 100% of the corresponding section.
AB Slider (28)
This horizontal slider has no unity nor specific value display. It allows to morph current settings between two loaded presets.
A double-click on one side of the slider area toggles between full A and full B settings. The results of an in-between setting
can be saved as a new preset.
Automation (29)
Default Value: Off
When writing automation, if this button is engaged, ONLY the morphing slider value is recorded. No other parameter is
recorded.
When this button is engaged, ONLY the morphing slider value is applied when reading automation.
When this button is disabled, all the plug-in parameters values are recorded when writing automation. The morphing slider is
ignored.
When reading automation, if this button is disabled, all the plug-in parameters are controlled by the host automation except
the morphing slider.
The Automation button must be engaged if the morphing slider has to be mapped on a control surface.
Preset Management Access (30)
4.4 Pure Series II Pure Limiter II
88
4