User manual

User Manual : Strip and Bus Tools - Plug-ins
User Manual
212
• Hold the Ctrl key while dragging with the left mouse button to lock the gain parameter and only
change the frequency.
• Hold the Shift key while dragging with the left mouse button to lock the frequency parameter and
only change the gain.
Bus Tools
Bus Tools are very similar to Strip Tools but are specifically designed to be inserted into busses rather
than channels. Bus Tools combine the most frequently used ‘mastering’ processing blocks you find on
the output busses of a mixing console in a single plug-in, including an advanced limiter. Like Strip Tools
multiple instances of the Bus Tools plug-in are displayed in one large window. The number of instances
displayed is user selectable.
IMPORTANT! Pre-Anticipation (PA) and Delay Compensation (DC)
Delay compensation adds a delay determined by the Pre-Anticipation delay setting to all channels
passing through a Bus Tools plug-in NOT selected for processing.
If two or more Bus Tools are inserted in a Bus with PA & DC on, the delay times of each Bus Tools will
add together for all channels: