Owner's manual

M130 – T/C Calibrator
Instruction Manual Z1017-IR
E.O. 6566 Sept. 2008
www.meriam.com
Page 8 of 21
FUNCTIONAL MODES, STATES, AND KEY FUNCTIONS
Run Setup Edit Setup
Keys
MEAS
or
SIM
MEAS SETUP
or
SIM SETUP
EDIT MEAS
SETUP, or
EDIT SIM SETUP
SETUP Enters Setup state,
or ends simulation
activity
Back one menu
level, or exits
Setup state
Discards changes and
exits Edit Setup state
FUNC X Next Functional
mode
Next menu item ---
W UNITS Next engineering
unit
Previous menu
item
---
ENTER Toggles lower
display line
between TC type /
temp. unit and %
of range (SIM
only)
Selects menu
item
Saves changes and
exits Edit Setup state
Increment
(+) Group
MEAS: ---
SIM Manual:
Change values
--- Change value
Decrement
(-) Group
MEAS: ---
SIM Manual:
Change values
--- Change value
T/C Measurement
• When the M130 is turned on the display defaults to the previous mode it
was in with the previous T/C type and Unit. To change the mode press the
FUNC X key until the Measure mode is obtained. Once in Measure mode,
press the W UNITS key until the desired unit is obtained.
• Press the SETUP key to enter the initial setup menu for the current
functional mode. To go back one menu item press the W UNITS key. To
advance the menu, press the FUNC X key. SETUP key also backs out of
the Setup state and returns to the Measure mode.