SRC-2010 Programmable Remote Operation manual
The Smart Remote Control User’s Manual About this manual Preface This manual is designed to make using the SRC-2010 Smart Remote Control as easy as possible. Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The information in this document is subject to change without notice. The SRC-2010 comes preprogrammed with commands to control various Faroudja products.
Table of Contents PREFACE..................................................................................................................I CHAPTER 1.............................................................................................................1 Unpacking the Smart Remote Control ................................2 Smart Remote Control features..........................................3 Identifying components ......................................................4 CHAPTER 2.....................
The Smart Remote Control User’s Manual Deleting a macro ................................................................................. 42 The duplicate menu.......................................................... 43 Making LCD adjustments .................................................. 44 Adjusting the LCD contrast ............................................................... 45 Adjusting the LCD backlight............................................................. 46 Calibrating the LCD........
Table of Figures Figure 1-1: Front view ..........................................................................................4 Figure 1-2: Rear view ............................................................................................6 Figure 2-1: Inserting the batteries......................................................................8 Figure 2-2: Turning the LCD on....................................................................... 10 Figure 2-3: The Information Screen..................
Chapter 1 Introducing the Smart Remote Control Congratulations on the purchase of your SRC-2010 Smart Remote Control. The Smart Remote Control is a digital universal remote control that is easy to use and configure, enabling you to control all your IR equipped electronic devices. One feature of the Smart Remote Control is the touch screen control panel, which reduces the number of buttons on the device, making it easy for you to find the function you want.
The Smart Remote Control User’s Manual This manual will help you learn how to use all the advanced features of the Smart Remote Control. It will not explain how to use the functions for your devices. Please refer to your device’s user manual for information related to your device. Unpacking the Smart Remote Control After you have unpacked the Smart Remote Control, check the contents to make sure the following items are included.
Introducing the Smart Remote Control Smart Remote Control features This section provides an overview of the key features of the Smart Remote Control. For more information on getting the most from these features, refer to Chapter 2.
The Smart Remote Control User’s Manual Identifying components Please refer to the following illustrations to identify the components of the Smart Remote Control. This section provides an overview of the Smart Remote Control’s features and controls. Refer to Chapter 4 for a detailed description on operating and getting the most from these features.
Introducing the Smart Remote Control 1. Light Sensor The Light Sensor detects the ambient light brightness or dimness and will turn on according to the setting. Faroudja 2. LCD The LCD display enables you to configure and operate your devices by touching the screen on the function you want. Touch the LCD panel to power on the Smart Remote Control. Refer to Chapter 2, The LCD for a description of the functions in this display. 3.
The Smart Remote Control User’s Manual The following illustration shows the rear of the Smart Remote Control. 1. IR port 2. Battery compartment 3. Learning eye Figure 1-2: Rear view 6 1. IR port Point the IR port at the IR receiver of the device you wish to operate. 2. Battery cover Remove this cover to replace the AAA batteries. 3. Learning eye Point your device’s remote control at this eye to enable the Smart Remote Control to learn your remote control’s functions.
Ch a p t e r 2 Getting Started The previous chapter helped you to familiarize yourself with the various components and controls of the Smart Remote Control. This chapter will guide you through the steps for inserting the batteries and using the many features. Incorrect use of the batteries may cause them to burst or may cause leakage, which might damage the interior of the unit. Be sure to only use the correct type of rechargeable Ni-MH batteries with the Smart Remote Control.
The Smart Remote Control User’s Manual Inserting the batteries To insert the batteries, refer to the following illustration and instructions: 1. Remove battery cover. 2. Insert batteries. Ensure that you insert the batteries according to the marking inside the battery case. Figure 2-1: Inserting the batteries 1. 2. 3. 4. 8 Locate the battery bay cover at the back of the Smart Remote Control. Put your thumb in the battery cover slot and pull to remove the cover.
Getting Started Power supply precautions • • • Be sure that the positive (+) and negative (-) polarities of each battery match the polarities indicated in the compartment. Do not expose the batteries to excessive heat or flame. Keep the batteries out of the reach of children. Power supply tips • • • • • When the batteries are weak, it will be harder to control devices from a distance. Recharge the batteries immediately when the battery low powerwarning icon appears in the information screen.
The Smart Remote Control User’s Manual The LCD The LCD (liquid crystal display) touch screen enables you to configure and operate your Smart Remote Control with the touch of a finger.
Getting Started You can also turn the Smart Remote Control on by pressing one of the direct access buttons. Touch screen precautions Please read the following instructions carefully: • • • • • • • Faroudja Tap the LCD touch screen gently; never use force. Do not use a pen or any sharp object to tap the screen. Otherwise, you might damage the surface. You can use a blunt object such as a pencil eraser or the cap of a pen. Keep the touch screen dry. Wipe off any spills immediately.
The Smart Remote Control User’s Manual The Information screen The Information screen is displayed when you press the Information screen shortcut icon on the Smart Remote Control: Macro screen shortcut icon Information screen shortcut icon Main Date and time 1999 01- 01 03:23 Friday Press this icon to enable or disable the beep signal. Indicates battery charge level.
Getting Started Smart Remote Control buttons The Smart Remote Control has two sets of buttons for your convenience— direct access buttons and touch screen buttons. Direct access buttons The direct access buttons provide you with easy access to often-used functions such as volume and channel control, fast forward and fast reverse, play and stop.
The Smart Remote Control User’s Manual Touch screen buttons The touch screen buttons enable you to control your devices as you would with your remote control, set up macros, and configure your LCD panel the way you want. Figure 2-5: Touch screen buttons Using the touch screen is easy. Simply press the screen to activate a function. Press the arrow keys at the bottom of the touch screen to scroll between pages in the menu.
Chapter 3 Operating the Smart Remote Control This chapter will tell you how to set up the Smart Remote Control, how to automatically configure devices, and how to use the advanced features such as the macros. Press the Hardware Access Button with your finger to turn the Smart Remote Control on. The first screen that you see is the main menu. The main menu The main menu displays a list of the devices currently available on the Smart Remote Control.
The Smart Remote Control User’s Manual Press the left or right arrows to scroll between the main menu pages. The device menu Each device has its own device menu that contains the buttons and controls peculiar to that device. Each device has four pages in the menu. You can scroll between the pages using the LCD left and right arrows. From the main menu, press the TV button to display the TV device menu: Device Header Press this header to return to the Main Menu.
Operating the Smart Remote Control The setup menu The setup menu enables you to configure your Smart Remote Control. Press the menu button menu for three seconds. The setup menu appears: Setup Clock Timer Program Adjust Macro Duplicate Other Figure 3-3: The setup menu To scroll through the items on the setup menu, use the hardware channel up and channel down buttons. Press the enter (mute) button to enter an item submenu. Press the menu button to return to the previous screen.
Chapter 4 Customizing the Smart Remote Control This chapter shows you how to customize your Smart Remote Control to make it fit your particular requirements, how to use the learning function to configure your devices, and how to set up the LCD panel to your specifications. Press the menu button items are available: menu for three seconds to open the setup menu. Seven Clock Enables you to set the date and time. Timer Enables you to set a timer to run a device at a specified time.
Customizing the Smart Remote Control Setting the clock The clock menu enables you to set the Smart Remote Control date and time. In the setup menu, scroll to clock and press enter. You see the following screen: Clock Blinking cursor 1 1999 01- 01 03:23 Friday 0 1 2 3 4 5 6 7 8 9 Figure 4-1: The clock menu Change the number under the blinking cursor by pressing 0 to 9 on the LCD panel. After you enter a number, the cursor automatically moves to the next position.
The Smart Remote Control User’s Manual Using the timer The timer function enables you to set up devices to turn on at specified times. In the setup menu, scroll to timer and press enter. You see a list of timers: Timer Timer 01 Timer 02 Timer 03 Timer 04 Figure 4-2: Timer list Use the channel up or channel down to scroll through the list. There are 12 timers available. Select one of the timers and press enter.
Customizing the Smart Remote Control Timer view View enables you to look at previously stored timer settings. Timer setup Setup enables you to setup a device function to go off at a specified time. Scroll to setup and press enter. The following screen appears: Timer Press here to select which day or days you want the timer to run. 03:23 0 Daily 0 1 2 3 4 5 6 7 8 9 Press these numbers to enter the time you want the timer to run.
The Smart Remote Control User’s Manual Friday/Saturday: Every Saturday/ Mon.~Fri.: Monday ~ Friday/ Mon.~Sat.: Monday ~ Saturday Relabeling timers You can easily relabel the timer names. Follow these instructions: 1. From the timer menu (Figure 4-3) scroll to Relabel and press enter. The following screen appears: Timer 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . A G M S Y 22 B H N T Z C I O U DE F J K L P QR VWX 2.
Customizing the Smart Remote Control Using the program menu The program menu enables you to set up devices, clear a configuration for a key, clear the configuration for a device, or clear the configuration for all devices. Program Learning Clr. Key Clr. Device Clr. All Figure 4-5: The program submenu Using the learning function This section will cover the Smart Remote Control learning function, which enables you to set up the controls for each device with your device’s remote control.
The Smart Remote Control User’s Manual Figure 4-6: Using the Learning eye From the program menu (Figure 4-5), scroll to learning and press enter.
Customizing the Smart Remote Control Press this macro shortcut icon to open the macro recording function. Refer to page 39. This Macro button is designed for device menu. If you don’t need to set any Macro function in device menu, Please skip this function. In addition, from main menu’s MACRO 1 to MACRO 12, each MACRO button is independent. Program AUX 1 AUX 2 TUNER / TAPE CD Figure 4-7: Programming devices Press the button of the device that you want to program.
The Smart Remote Control User’s Manual The filled button corresponds to the direct access power button. With the Learning eye, you can now map buttons on your device remote control to the direct access buttons on the Smart Remote Control. Follow these instructions: 1. Point your remote control at the Smart Remote Control’s Learning eye as shown in Figure 4-6. 2. Press your remote control power button. When the screen displays OK, release the power button. Refer to the following illustration: OK 3.
Customizing the Smart Remote Control The clear key function enables you to erase the settings for a button in one of the device menus. Follow these instructions: 1. In the program menu, scroll to Clr. Key and press enter. The list of devices appears. 2. Press the device you want to configure. 3. In the device menu, press the key you want to clear. 4. Repeat steps 1 through 3 for all other keys you want to clear.
The Smart Remote Control User’s Manual The Clear All function enables you to erase the commands for all devices. Follow these instructions: 1. In the program menu, scroll to Clear All and press enter. 2. You are prompted to press the enter button to delete the settings for all devices, or press the menu button to cancel the changes and return to the previous screen. Changing the LCD layout The adjust menu enables you to resize, relabel, and delete buttons on the main menu and on the device menus.
Customizing the Smart Remote Control Adjust Resize/Add Relabel Delete Figure 4-10: Adjusting main menu buttons Each item is described below. Resizing or adding buttons on the main menu Follow the instructions below to resize buttons on the main menu. 1. Scroll to Resize/Add and press enter. You see the main menu: Press this icon to toggle between button resize and text edit functions. Press this icon to undo an action. Main 2.
The Smart Remote Control User’s Manual Main 3. AUX 1 AUX 2 TUNER / TAPE CD Press the place where you want the upper left corner of the button to be. A black square appears where you pressed the LCD. Main 4. 30 AUX 1 AUX 2 TUNER / TAPE CD Press the place where you want the lower right corner of the button to be. A black square appears where you pressed the LCD.
Customizing the Smart Remote Control Main 5. AUX 1 AUX 2 TUNER / TAPE CD Press the space between the two black squares: Main 6.
The Smart Remote Control User’s Manual Main AUX 1 AUX 2 TUNER / TAPE CD Note the following points when resizing buttons: 32 • You cannot place the lower left corner above or to the left of the upper right corner. • You cannot resize a button to where it will overlap an adjacent button. • If you want to relabel a button, press the resize icon in the upper right corner. The icon changes to a text icon T .
Customizing the Smart Remote Control Relabeling buttons on the main menu You can easily relabel the buttons on the main menu. Follow these instructions: 1. From the adjust menu (Figure 4-9) select Main Menu and press enter. 2. Scroll to Relabel and press enter again. You see the device list. 3. Select a device to relabel. You see the following screen: TV . . . . . . . . . . . . . . . . . ..................... A G M S Y Faroudja B H N T Z C I O U D E J K P Q VW F L R X 4.
The Smart Remote Control User’s Manual Adjust LD/VCD SAT VCR DVD AMP TV TUNER TAPE CD 6. 34 Select which device attributes you want applied to your button. When accessing your relabeled button, the menus will be the same as the device that you select here.
Customizing the Smart Remote Control Deleting buttons on the main menu You can easily delete buttons on the main menu. Follow these instructions: 1. From the adjust menu (Figure 4-9) select Main Menu and press enter. 2. Scroll to Delete and press enter again. You see the device list. 3. Select a device button to delete. You see the following screen: Adjust Sure ? (Y) Enter (N) Menu 4. Faroudja Press the enter button if you want to delete settings for the button.
The Smart Remote Control User’s Manual Adjusting buttons on the device menu From the adjust menu (Figure 4-9) select Device and press enter. You see the following screen: Adjust Resize / Add Relabel Delete Recall Figure 4-11: Adjusting buttons on the device menu The procedures for resizing and deleting buttons on the device menu are the same as those for resizing and deleting buttons on the main menu.
Customizing the Smart Remote Control Relabeling device menu buttons You can easily relabel the buttons in device menus or choose icons to represent the buttons. Follow these instructions: 1. From the adjust menu (Figure 4-9) select Device and press enter. 2. Scroll to Relabel and press enter again. You see the device list. 3. Select a device to relabel, for example “CD”. You see the following screen: Adjust T Scan Shuf. Edit Rept.
The Smart Remote Control User’s Manual Scan . . . . . . . . . . . . . . . . . S A G M S Y B H N T Z C I O U DE F J K L PQR VWX icon 5. Note that there is one additional button—the Icon button. Press this button to display a list of icons: Scan . . . . . . . . . . . . . . . . . S CH+ CH- REC < 6. > icon Press any of the buttons shown to replace the text “Scan” with an icon. Press < or > to scroll between the pages and display more icons.
Customizing the Smart Remote Control Using macros The macro feature enables you to store up to 20 commands for each macro. You can setup, relabel, and delete macros from the macro submenu. When you have created a macro, you will be able to run many commands by pushing only one button. From the setup menu, scroll to macro and press enter. You see a list of macros: Macro Macro 01 Macro 02 Macro 03 Macro 04 Figure 4-12: The macro list Scroll to one of the macros in the list and press enter.
The Smart Remote Control User’s Manual Macro setup Follow these instructions to set up a macro: 1. From the macro menu, scroll to setup and press enter. The macro is now being recorded. 2. Press the device button combination that you want to be recorded into the macro. If necessary, you can set a time delay between each command in the macro. In the upper right-hand corner of the screen, you see an hourglass icon 6.
Customizing the Smart Remote Control Macro Processing 4. The macro has been recorded. To run the macro, press the macro shortcut icon M in the upper left-hand corner of the screen, and then select the macro you want to run from the macro list. Relabeling a macro Follow these instructions to relabel a macro: 1. In the setup menu, scroll to Macro and press enter. The list of macros appears. 2. Scroll to the macro you want to rename and press enter.
The Smart Remote Control User’s Manual Macro . 1. . . . . . . . . . . . . M ........ A G M S Y B H N T Z P1 C I O U DE F J K L P QR VWX P2 P3 4. Enter the alphanumeric characters from the LCD screen. Press P1 to access upper case letters, press P2 to access lower case letters, and press P3 to access numbers and special characters. 5. Press enter when you have made your changes. Deleting a macro Follow these instructions to delete a macro: 42 1.
Customizing the Smart Remote Control Macro Setup Relabel Delete 3. Scroll to Delete and press enter. You will see the following screen: Macro Processing 4. The macro information has been deleted. The macro delete function only deletes the macro-recorded data; it does not remove the macro name from the macro list. The duplicate menu Please refer to the “SLC-2081 Connecter User’s guide”.
The Smart Remote Control User’s Manual Making LCD adjustments The other menu enables you to set the LCD contrast, adjust the backlight, and calibrate your Smart Remote Control. From the setup menu, scroll to Other and press enter. You see the following screen: Other Contrast Backlight Calibrate Figure 4-14: The “other” menu Each item is described below.
Customizing the Smart Remote Control Adjusting the LCD contrast Scroll to Contrast and press enter. You see the following screen: Other ( Press this arrow to decrease the LCD contrast. ) Contrast Press this arrow to increase the LCD contrast. Figure 4-15: Adjusting the contrast Press the right LCD arrow to increase the contrast. Press the left LCD arrow to decrease the contrast.
The Smart Remote Control User’s Manual Adjusting the LCD backlight From the “other” menu, scroll to Backlight and press enter. You see the following screen: Back-Light - - Switch - - Press to turn the backlight off and on. ON - - Level - - Indicates the current backlight sensitivity level. Max : 99 Set : 52 Min : 00 + _ - - Period - - Press to decrease the duration that the backlight stays on. 05 sec < < Press to increase the backlight sensitivity level.
Customizing the Smart Remote Control Calibrating the LCD Sometimes the LCD buttons become uncalibrated. When this happens, pressing an LCD button will result in the adjacent button being pressed. In this instance, you should calibrate the LCD panel. From the other menu, scroll to Calibrate and press enter. You will see the calibrate screen. Press the edge of the screen next to the pen icon. The pen icon will move to the next edge.
Appendix A Specifications Model SRC-2010 Battery 3 x AAA alkaline batteries or Ni-MH rechargeable batteries Dimensions 210 (L) x 68 (W) x 24 (H) mm Weight 175.
Customizing the Smart Remote Control Faroudja 49
Appendix B Troubleshooting If you have trouble configuring or operating the SRC-2010, first check that you have inserted the batteries correctly (page 8). Then check the items below. Symptom The SRC-2010 doesn’t operate your device. Remedy • • • • Move closer to the device. The maximum operating distance is approximately 10 meters. Ensure that you are aiming the SRC-2010 directly at the device and that there are no obstructions between the SRC-2010 and the device.