Product specifications
Using the FM tuner
16
To set up the preset labels
● Turn off the FM tuner, using the power switch on the back
panel.
● Turn on the power again while holding down the Store key on
the front panel.
The display will show:
Labels
It will then show the first preset
number…
1
…followed by the corresponding
preset label:
•adio 1
To alter a preset label
● Press ] (Next) or [ (Previous) to select the number of the
preset you want to alter.
After a short delay the existing
label is shown:
•adio 3
If there was previously no label the display will be blank.
A flashing block cursor shows which character you can change.
● Press A (Up) or V (Down) to change the character.
The character cycles through the symbols: 0 – 9, a – z, A – Z, .,
and space.
● Press Store to move on to the next character.
● When you have specified all eight characters press Store to
store the label.
The display will show:
Stored
● When you have finished defining labels, switch the power off
and on again to restore the FM tuner to normal operation.