Operation Manual

Setting up the digital surround processor
61
To connect to a 562 or 562V
Multimedia Controller
562V Multimedia Controller
Digital lead
568 Digital Surround Processor
DIGITAL OUTPUT
MAIN
DIGITAL INPUT
CD/D1
ANALOGUE INPUT
TV/A1
MAIN
ANALOGUE
Audio lead
● Connect the MAIN digital output of the 562 or 562V to the CD/
D1 digital input socket of the 568, using high-quality 75Ω
screened cable.
● Connect the MAIN analogue output of the 562 or 562V to the
TV/A1 analogue input socket of the 568, using screened audio
cable.
This takes advantage of the high-quality 24-bit analogue-to-
digital converter in the 568 to perform the conversion of
analogue sources.
● If you are using a 562V to switch the video signals, route the
video through the 568 to take advantage of the on-screen
display; see On-screen display, page 55.
● Connect up to eight analogue, five digital, and two optical
sources to the appropriate inputs of the 562 or 562V.
● Configure the 562 to Type 1.
● Configure each 562 or 562V source as required; refer to the
562/562V User Guide for more information.
● Configure the 568 to a 562 Type option; see Choosing a
standard setting, page 64.