User guide

25
Installing the 808.3
Signature Reference
CD Player
To connect to DSP loudspeakers using SpeakerLink (daisy chain)
Meridian 808.3 CD Player
SpeakerLink lead
SpeakerLink lead
MERIDIAN
SPEAKERLINK
Front L – Master
MERIDIAN
SPEAKERLINK
INPUT OUTPUT
Front R – Slave
MERIDIAN
SPEAKERLINK
INPUT OUTPUT
The 808.3 can be connected directly to Meridian DSP
loudspeakers to create a complete compact stereo
system, with volume and other preamplifier controls
provided by the loudspeakers via the MSR+ or the front
panel.
The Meridian SpeakerLink connection provides both
two-channel digital audio and Meridian Comms control.
This is an alternative to the “home run” wiring
configuration shown in the next section.
Connect the upper SpeakerLink output from
the 808.3 to the SpeakerLink input on the DSP
loudspeaker chosen as the master, using a
SpeakerLink lead.
Connect the SpeakerLink output from the master
DSP loudspeaker to the SpeakerLink input on the
other (slave) DSP loudspeaker, using a second
SpeakerLink lead.
Configure the loudspeakers as described in the
Meridian DSP Loudspeaker User Guide .
•
•
•