User guide

25
Installing the 810
Scaler
Connecting up
To connect to the 810 D-ILA Projector
RS232-C
810 D-ILA Projector
810 Scaler
RS232 lead
DVI leads
VIDEO INPUTS
DVI 4 DVI 3 DVI 2 DVI 1
VIDEO OUTPUTS
RS232
PROJECTOR
DVI 4 DVI 3 DVI 2 DVI 1
Connect the DVI Outputs 1 to 4 from the 810 Scaler
to the DVI 1 to DVI 4 inputs on the 810 D-ILA
Projector, using DVI leads, ensuring that you link
connectors with matching numbers.
• Connect the RS232 Projector connector on the 810
Scaler to the RS232-C connector on the Projector,
using an RS232 Male-Male Null Modem Cable.
•
To connect to a video source
G95 DVD Surround Receiver System
COMMS lead
HDMI lead
HDMI
OUTPUT
MERIDIAN
COMMS
MERIDIAN
COMMS
HDMI
INPUT
810 Scaler
Connect the HDMI output from the video source to
the HDMI input on the 810 Scaler, using an HDMI
lead.
Alternatively, if the video source provides a DVI output,
use the DVI input on the 810 Scaler.
• If the video source is a Meridian product, such as
a G95 DVD Surround Receiver System, connect
together the COMMS sockets using the Comms lead
provided with the other product.
Configure the source to use the appropriate input;
see Configuring the sources , page 34.
•
•