Installation Instructions

13
14
INSTALLATION GUIDE
905 Barge Channel
903 Barge Cover
NOTES
FIG. 02.D
8. Install 905 barge cover aligning 2” past fascia. Install prior to installing panels.
9. Notching the top of the adjoining 903 barge cover min 2”. (Fig. 02.C)
10. Fasten 905 barge cover with 3 fasteners; (2) on overlaps and (1) in the middle
using #8 x ¾” screws.
11. Miter and cut at ridge overlapping 1”.
905 Barge Channel
903 Barge Cover
Next Barge Cover
Notched Barge Cover
Notch trim lines
Piece slides over notched
Barge Cover
5”
FIG. 02.C
2”
DETAIL  CONTINUED
Eave Closure on Barge Cover
DETAIL  CONTINUED
Eave Closure on Barge Cover
Finishing Barge cover at the eave