Installation guide

  



Source Volume
U s i n g a
p r e a m p l i f i e r
1 0
Copy
To copy a source to
the Copy outputs
• Press Copy until the
display shows the
source you want to
copy. For example:

C. Source copies the
current source, and C.
Mute mutes the copy
outputs.
Home Selecting sources
The G Series controllers provide up to 12 sources initially labelled:
CD, RADIO, DVD, AUX, DISC, TAPE, TV, CABLE, SAT, VCR1,
VCR2, and GAME. You can configure the names of each source to
suit the other equipment in your system; see the G Series Control
Unit and Receiver Installation Guide .
• Press Home to display the soft keys for selecting a source.
Balance
To change the
balance
• Press More until
<Bal. and Bal.> are
displayed.
• Press <Bal. or Bal.>.
As you change the
balance the display
shows how far you have
moved the sound field,
and the direction:

To restore centre
balance
• Adjust the balance
until the display
shows:

Sources
To select a source
Either:
• Press the appropriate
source key on the
MSR+.
Or:
• Press the soft key
corresponding to the
source.
You may need to press
More until the source
you want is displayed.
Volume
To change the
volume
• Turn the volume
control.
You can adjust the
volume between 1dB
and 99dB in precise
steps of 1dB, where 9dB
is equivalent to doubling
the loudness.
As you adjust the
volume the display may
change to show the
currently selected source
and current volume:

To mute the sound
• Press the volume
control.
The display will show:

To restore the sound
• Press the volume
control again, or
adjust the volume.
To mute the speakers
without muting the
headphones (G51
only)
• Press More until Spkr
is displayed.
• Press Spkr to turn the
speakers off.