Installation guide

ÄÅÇ ÄÅÉ àâä
Store Clear

Store indicates track will play. Clear indicates track will not play. Track number
P l a y i n g C D s
1 4
Play
To play a selection of
tracks
• Programme the tracks
you want to play,
using Store and
Clear.
• Press >.
To clear the
programmed
selection of tracks
• Press Home to display
the * key.
• Press * twice.
The display shows:

Store
To make a selection
by adding tracks
• Press [ or ] to
select the first track
you want to play, and
press Store.
The display will change
from Track to Store,
and all the other tracks
will be marked Clear.
You should store the
first track for a selection
within two seconds, or it
will begin to play.
Clear
To make a selection
by omitting tracks
• Press [ or ] to
select the first track
you want to omit, and
press Clear.
The display will change
from Track to Clear,
and all the other tracks
will be marked Store.
You should clear the
first track for a selection
within two seconds, or it
will begin to play.
More Programming a selection
The G Series CD and DVD players allow you to programme a
selection of tracks, and then play only those tracks you have
programmed.
You can programme a selection either by storing the tracks you
want to play, or by clearing the tracks you do not want to play.
If you programme a selection by storing the tracks you want to
hear, you can play the tracks in any order and repeat tracks in the
sequence.
You can programme a selection while the disc is playing, in which
case the selection will be played after the current track finishes.
• Press More to display the soft keys for programming selections.
Previous/Next
To add or remove a track from a selection
• Select the track using [ or ].
Alternatively you can enter the track number using
the MSR+.
• Press Store to add the track, or Clear to remove
the track.