Installation guide
G55 Five-channel Power Amplifier
Use this output To connect to this
CHANNEL 1 to CHANNEL 5
Loudspeakers of 2
Ω to 15Ω, using either plug or bare wire connections.
FAN OUTPUT A Meridian rack mount kit. This is a proprietary Meridian connection.
I n s t a l l i n g
t h e p o w e r
a m p l i f i e r
1 3
Outputs
The recommended assignment of channels, to make best use of the
capacity of each power supply, is as follows:
Channels 1 & 2 main left and right; channel 3 centre; channels 4 &
5 rear left and right respectively.
Alternatively, channels 1/2 and 4/5 can be used in bridge output
mode; see
To wire to passive loudspeakers in bridge mode
,
page 15.
Each channel of the G55 Five-channel Power Amplifier provides
twin outputs for bi-wiring. On speakers that provide separate
connections to the bass/mid and tweeter units this allows the units
to be connected independently to the power amplifier, for optimum
sound quality.
Alternatively, for loudspeakers providing a single pair of inputs,
either of the output terminals can be used.
G Series Power Amplifier 13 9/5/06 11:59:48 am