User Manual

1
SECTION 1 - FRONT PANEL CONTROLS
Time: Sets the time for the delay and the
synchronized phaser
Alt Function: Early Modulation
Triangle waveform modulation of the early delay
taps. Ranges from gentle modulation, to FM, to
pitch effects
Mix: Adjusts the balance between
Dry and Wet signals
Alt Function: Delay Level Sets the
gain of the Wet signal. Ranges from
0dB to -12dB. For auto-scaling, set
to min
Feedback: Sets the feedback amount
Alt Function: Feedback Filter Controls filter in the
feedback path. Set to noon for no
filtering, set towards minimum for a darker filter, set
towards maximum for a brighter filter
Dimension: Sets the dimension amount. Dimension
smears and sustains the delay tap reflections
Alt Function: Dynamic Flanger Mode Set to minimum
for Envelope Down, set to noon for Envelope Up, and
set to maximum for LFO
Tap: Sets the time for the delay and the
synchronized phaser
Alt Function: Dotted Eighth Note
Changes current tempo from 1/4 notes to dotted
1/8 notes
Hold Tap: to engage Half Speed Delay
Bypass: Disables processing and
passes the input through to the
output
Alt Function: Dynamic Flanger Feed-
back Adds negative feedback to the
Dynamic Flanger
Multiply: Sets the number of delay taps added to
the output
Alt Function: Late Modulation
Triangle waveform modulation of the later delay
taps. Ranges from gentle modulation, to FM, to
pitch effects
Dynamics: Sets the intensity/depth
of the Dynamic Flanger.
Flanger is off at minimum
Alt Function: Dynamic Flanger Speed
Sets the envelope
attack time or LFO speed based on
the Dynamic Flanger Mode
Hold to access Alt Functions:
Alt Functions are only accessible when this
button is held
(Press to Select Phaser)
Slow: Stereo Barberpole phaser with
fixed speed of 0.1 Hz
Sync: Stereo Barberpole phaser with
speed linked to a quarter note of the
delay time
Slow + Sync: Stereo Barberpole
phaser with speed linked to a whole
note of the delay time