Service manual

ATTENTION:

OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DEVICES

Motherboard Handling Precautions

NOTE: Before handling any boards, observe the following procedures:

• Remove any static charge from your body before handling the boards.

• Use a ground strap when handling the boards.

• When plugging in connectors to the board, make sure the connector is inserted

straight onto the header and that the connector covers all header pins.

• Do not connect any peripheral device to the board if the power is still connected to

the peripheral or if power is already applied to the board.

• Prevent electro-static discharge by storing the boards in the anti-static bags in which

they are shipped.

Troubleshooting Information - Motherboard Handling Precautions

Megatouch MAXX Technical Reference Manual