User Manual

ManualsBrandsMerkloos ManualsAlarm SystemsMultifunctional Alarm with Remote Control - Wireless Alarm System for Bicycle Scooter Motorcycle Window Door House - Bicycle Alarm Scooter Alarm Motorcycle Alarm Window Alarm Door Alarm Home Alarm - Smart Bicycle Lock with Motion Sensor and SOS Sound Sign

Structure

Disarm

Arm

Double-sided

squared tap

Double-sided

squared tap

Zip Tie Holder

Tone

Selected

Vehicle

Finder

(Alarm)

(Remote Control)

(Installation hint)

Volume

(113dB)

User Manual

KS-SF22R

113dB

Vehicle Anti-Theft Alarm

Triaxial

Accelerometer

Sensor

一

7 Stages

Sensitivity

Long Standby

Time

Emergency

Help Function

2019.04.23

1 2 3

4 5 7

2.1 Method of loading & replacing batteries

2.1.1

Normally batteries are loaded after production .Occasionally, do as

the below figure. Remove the screw from the bottom, and then load 3

pieces of AAA alkaline batteries. It is succeed if the alarm sounds 3 beeps.

Unload the batteries if won’t use the alarm for long time.

Instructions

2.2 Usages and Settings

2.2.1 ARM &DISARM Mode Setting

2.2.1.1

Press

[ ]

button on remote once, the alarm will sound

“Do..Le..Mi”, then a beep after 5s,it becomes ARM alert state .If any

vibration or movement detected, the alarm will sound a warning beep for

2s in a certain tone, if triggering the alarm again within 2-12s, it will alarm

for 30s in 6 ringtones automatically.

2.2.4

Vehicle Finder function:

press[ ] button, it will sound

certain tone .you can set different tones by [ ] button ，vehicle finder

tone is the same tone once you set by [ ] button

Remove the screw from the bottom, use triangle slice to apart the plate from

cover from the bottom or sides.

2.2.2 Sensitivity Adjustment

2.2.2

7 stages from Do Le Mi Fa So La Si, default sensitivity is Do

(highest). Adjustment way: press and hold [ ] ,alarm will sound

“Me..Le..Do” for 2 or 3 times ,when LED indicator goes off and display

for a long pause then be bright, loosen your finger then press [ ]

button once ,it will sound Do Le Mi Fa So La Si, then press [ ] button

again once, you will hear “Do” , press again ,”Le”etc.. from highest to

lowest ,then sound in circulation .Once any sensitivity you need, just stop

and press [ ] button to exit the setting .

2.2.3 Select Tones

Press [ ] button to select tone, 6 tones in all (Invalid for ARM Mode)

2.2.7 Low Battery Indication

2.2.7 .1

For alarm, please replace batteries in time if you hear

“Du..Du”when arming / disarming .

2.2.7 .2

For remote, please replace battery if you notice that the LED

indicator goes dark or wireless range becomes shorter.

2.2.6 SOS Function Setting

2.2.6

SOS function is off in default mode .Notification: SOS function

will recognize the installation status of alarm. Please do not change

direction after installation, or this function will be invalid.

2.2.6

Turn on SOS: Press and hold [ ] button, when LED indicator

goes off and display for a long pause then be bright, press [ ] button,

the alarm will sound a beep, then 5 beeps ,the function is on. If 2 long

beeps, setting is failure. ( keep the alarm still when setting )

2.2.5

Program one more remote: press [ ] button on paired remote

once ,then long press [ ] button，when LED indicator goes off and

display for a long pause then be bright, after a beep, press [ ]

button on new remote you want to add, if 2 beeps ,the new remote can be

used freely .

2.2.5

Erase all remotes: Be caution for this operation. Keep the alarm

in disarm mode ,long press [ ] button on paired remote, when LED

indicator goes off and display for a long pause then be bright, after a

beep ,press [ ] button, 3 beeps will erase all paired remotes .

2.2.6

Turn off SOS : press and hold [ ] button, when LED

indicator goes off and display for a long pause then be bright ,press

[ ] button, then 2 long beeps will turn off the function. Next, press

[ ] button to exit the setting. Power off the alarm will turn off SOS

function too.

2.2.6

When the alarm is in disarm mode with SOS function on, tilt the

vehicle at 45 degree angle, it will sound SOS tone automatically, straighten

the vehicle will stop the sound .

Waterproof: IP55

Range: 40-80M

Volume: 113dB

Operating Temperature: -20~60℃

Operating Humidity: < 80%

Storage Conditions: -30℃- +70℃

Triaxial Accelerometer Sensor, 7 Stages Sensitivity

for adjustment

SOS Emergency Help Function, 6 Tones Loud Siren

Sound Selectable

3*AAA Batteries for Power Supply, Life lasts for 1-3

months. (Specific depending on the usage)

]

2.2.5 Program remote

2.2.5.1

Program the first remote: unload the batteries ,then load them after

around 30s, press and hold [ ] , then you will hear a beep, press[

button，2 beeps , it succeeds .

size:75x75mm

正面

反面

SF22R英文说明书 2019.04.23修改

2.2.1.2

To stop the alarm or exit ARM mode, press [ ] button on remote

once, it will sound “Mi..Le..Do”.

Screw

1 2 3