Optix Series LCD Monitor Optix MAG341CQ (3MA0)
Contents Copyright and Trademarks Notice ��������������������������������������������������������������������������iii Revision ������������������������������������������������������������������������������������������������������������������iii Technical Support ���������������������������������������������������������������������������������������������������iii Safety Instructions���������������������������������������������������������������������������������������������������iv CE Conformity ����������
Preface Copyright and Trademarks Notice Copyright © Micro-Star Int’l Co�, Ltd� All rights reserved� The MSI logo used is a registered trademark of Micro-Star Int’l Co�, Ltd� All other marks and names mentioned may be trademarks of their respective owners� No warranty as to accuracy or completeness is expressed or implied� MSI reserves the right to make changes to this document without prior notice� Revision Revision V1�0 Date 2018/06 Technical Support If a problem arises with your product and no solutio
Safety Instructions ◙ ◙ ◙ Read the safety instructions carefully and thoroughly� All cautions and warnings on the device or user’s manual should be noted� Refer servicing to qualified personnel only. Keep the User’s Guide that comes with the package for future reference� To prevent fire or shock hazard, keep this device away from humidity and high temperature� Lay this device on a reliable flat surface before setting it up.
Preface Place the power cord in a way that people are unlikely to step on it� Do not place anything on the power cord� Always keep strong magnetic or electrical objects away from the device� If any of the following situations arises, get the device checked by service personnel: ◙ The power cord or plug is damaged� ◙ Liquid has penetrated into the device� ◙ The device has been exposed to moisture� ◙ The device does not work well or you can not get it work according to user’s manual� ◙ The device has dropp
CE Conformity This device complies with the requirements set out in the Council Directive on the Approximation of the Laws of the Member States relating to Electromagnetic Compatibility (2014/30/EU), Low-voltage Directive (2014/35/EU), ErP Directive (2009/125/EC) and RoHS directive (2011/65/EU)� This product has been tested and found to comply with the harmonized standards for Information Technology Equipment published under Directives of Official Journal of the European Union� FCC-B Radio Frequency Interf
Preface WEEE Statement Under the European Union (“EU”) Directive on Waste Electrical and Electronic Equipment, Directive 2002/96/EC, which takes effect on August 13, 2005, products of “electrical and electronic equipment” cannot be discarded as municipal waste anymore and manufacturers of covered electronic equipment will be obligated to take back such products at the end of their useful life� Chemical Substances Information In compliance with chemical substances regulations, such as the EU REACH Regulati
1 Getting Started This chapter provides you with the information on hardware setup procedures� While connecting devices, be careful in holding the devices and use a grounded wrist strap to avoid static electricity� IMPORTANT • • The illustrations are for reference only� Your monitor may vary in appearance� Do not use any sharp objects on the monitor�
Package Contents 1� Monitor 2� Stand 3� Stand Base with Screw 4� Power Cord 5� HDMI Cable 6� DisplayPort Cable 7� Quick Start Guide 8� Warranty Card * Contact your place of purchase or local distributor if any of the items is damaged or missing� * Package contents may vary by country� 1-2
Getting Started Installing the Monitor Stand 1� Fit the stand to the monitor and tighten the stand with the screws� 2� Place the protection cover� 3� Connect the base to the stand and tighten the base screw to secure the base� IMPORTANT Place the monitor on a soft, protected surface to avoid scratching the display panel� 1 2 3 1-3
Adjusting the Monitor This monitor is designed to maximize your viewing comfort with its adjustment capabilities� IMPORTANT Avoid touching the display panel when adjusting the monitor� O 20+2 1-4
Getting Started Monitor Overview 2 1 M 3 4 5 6 E 1-5 7 8 9 10
1 Menu Key 2 Select Key 3 Select Key 4 Enter Key 5 Power Button 6 LED Indicator: Blue: On Blinking Blue: Standby 1-6 7 DVI Port 8 HDMI Port 9 DisplayPort 10 Power Jack
Getting Started Connecting the Monitor to PC 1� Turn off your computer.
2 OSD Setup This chapter provides you with essential information on OSD Setup� IMPORTANT All information is subject to change without prior notice�
OSD Key The monitor comes with a set of OSD Key that helps to control the On-Screen Display (OSD) menu� M 2-2 E
OSD Setup Without entering OSD menu, you can use these OSD keys as hot keys for quick seetings� OSD Key Function Basic Operations Crosshair ■ Press button to enter this setting� ■ Press ■ Press Mode or E ■ Press button to enter this setting� ■ Press Input or button to select� button to confirm and exit. ■ Press E ■ Press E button to enter this setting� ■ Press E button to select� button to confirm and exit. ■ Press or E button to select� button to confirm and exit.
OSD Setup Menu Press M button to launch the On-Screen Display (OSD) main menu� In OSD screen, E buttons to tune the desired function to suit your personal preferences� use M These OSD keys operations are as follows� OSD Key M Basic Operations ■ Exiting the current menu ■ Selecting function menus and items ■ Allowing downward adjustment in function values ■ Selecting function menus and items ■ Allowing upward adjustment in function values E 2-4 ■ Entering the submenus ■ Confirming a selection or setting
OSD Setup h Game 1st Level Menu 2nd/3rd Level Menu Description Mode User User mode� (Default) Movie Movie mode� FPS First person shooting game mode� RTS Strategic game mode� Eye Saver Less blue light mode� DCR On Turn on dynamic contrast function� Off Turn off dynamic contrast function. FreeSync On Turn on FreeSync function� (Supported by AMD graphics card) Off Turn off FreeSync function.
h Input 1st Level Menu Description DVI Select signal source from DVI port� HDMI Select signal source from HDMI port� DP Select signal source from DP port� h PIP/PBP 1st Level Menu 2nd/3rd Level Menu Description PIP DVI / HDMI / DP PBP Source PIP Size Small / Medium / Large Location Left Top / Right Top / Left Bottom / Right Bottom� Display Switch Display Switch allows users to switch between primary and secondary input sources� Source DVI / HDMI / DP Display Switch Display Switch allow
A Appendix IMPORTANT All information is subject to change without prior notice�
Specifications Model Optix MAG341CQ Size 34 inch Curvature 1800R Panel Type VA Resolution 3440 x 1440@100Hz Aspect Ratio 21:9 Brightness (nits) Contrast Ratio 250 3000:1 100Hz Refresh Rate Response Time 16ms (Typical) Input Interface DVI x 1, HDMI 2�0 x1, DP x1 8ms (GTG) View Angles 178°(H) , 178°(V) NTSC 85% Surface Treatment A-2 Display Colors 16�7M Power Type Built-in Adapter Power Consumption (Typical) 60W AC 100~240V, 50~60Hz Power Input Adjustment (Tilt) VESA Mounting -
Appendix Preset Display Modes Resolution Optix MAG341CQ DVI HDMI DP 640x480 @60Hz V V V 640x480 @72Hz V V V 640x480 @75Hz V V V 800x600 @56Hz V V V 800x600 @60Hz V V V 800x600 @70Hz V V V 800x600 @75Hz V V V 800x600 @100Hz V V V 1024x768 @60Hz V V V 1024x768 @70Hz V V V 1024x768 @75Hz V V V 1024x768 @100Hz V V V 1280x1024 @60Hz V V V 1280x1024 @75Hz V V V 1280x1024 @100Hz V V V 1440x900 @60Hz V V V 1440x900 @100Hz V V V 1680x1050 @60Hz
Troubleshooting The power LED is off. ■ ■ Press the monitor power button again� Check if the monitor power cable is properly connected� No image. ■ ■ ■ ■ Check if the computer graphics card is properly installed� Check if the computer and monitor are connected to electrical outlets and are turned on� Check if the monitor signal cable is properly connected� The computer may be in Standby mode� Press any key to activate the monitor� The screen image is not properly sized or centered.
