User Manual

2
Plug In
STEP 2
01.
In the Geeni app, on
the top corner of the
Devices screen, click
Choose “Wi-Fi Camera”.
02.
Make sure the light on
the camera is blinking
red, indicating the
device is ready to
connect, then press
Next Step.
STEP 3
Add device:
Easy Mode
Plug In
*Optional:
Insert
Micro SD
card as
shown
Easy Mounting
Plug camera into
power source using
the included USB
cable. The indicator will
remain solid red when
starting up, but will
begin to blink red when
connected. If it does
not blink, please reset.
*see reset instructions
on p. 4
M
I
C
R
O
S
D
RESET