User manual mermaid ventura 150 TFT x4 www.mermaid.
mermaid ventura 150 TFT x4 - User manual Version 1.1 Table of Content: Table of Content: 1. Preface 2. Important Information 3. Content of the Box 4. Unpacking, Placement and Set-up (PC) 5. OSD Key Functions 6. OSD Functions & Adjustments 7. Guarantee Terms 8. If you need to contact us! 9. Troubleshooting Appendix A: Connector Specifications Appendix B: Power Management Mode: VESA DPMS protocol applied Appendix C.
mermaid ventura 150 TFT x4 - User manual Version 1.
mermaid ventura 150 TFT x4 - User manual Version 1.1 1. Preface The mermaid ventura 150T x4 is a state of the art high-tech flat panel TFT monitor, including four high quality TFTLCD panels with maximum resolution of 1024x768 each, based on the newest TN technology, and high brightness 4lamp CCFL backlight units. The very fast response time (25 ms) provides excellent suitability for video and gaming applications.
mermaid ventura 150 TFT x4 - User manual Version 1.1 3. Content of the Box • ventura 150 TFT x4 (15” x 4) Accessories box including: • • • • • PSU (120 Watt) Powercord Wall bracket Users manual Glass cleaner & screen wiping cloth 4. Unpacking, Placement and Set-up (PC) After the box has been opened, remove the accessories box. Bend the cardboard flaps outward and get hold of the whole cabinet. Gently lift the monitor out of the cardboard box. Most convenient is to be two persons.
mermaid ventura 150 TFT x4 - User manual Version 1.1 • The diagram below shows the interrelationship between the screen cable, the OSD key panel at the bottom of the screen and the related TFT panel.
mermaid ventura 150 TFT x4 - User manual Version 1.1 5.
mermaid ventura 150 TFT x4 - User manual Version 1.1 6. OSD Functions & Adjustments PC menu (Only available when the PC input source is active) Function Description 1. Brightness Changes the overall brightness of the image. 2. Contrast Changes the ratio between white and black. ¢¸ Distinct 3. Phase 4. Frequency ¢º Vague Fine tune vertical and horizontal noise in the display.
mermaid ventura 150 TFT x4 - User manual Version 1.1 OSD Functions & Adjustments - continued Video menu (Only available when Composite or S-video input source is active) Function Description 1. Brightness Changes the overall brightness of the image. 2. Contrast Changes the ratio between white and black. ¢¸ Distinct ¢º Vague 3. Hue Changes the color balance in either bluish or greenish direction. 4. Colour Changes the colour saturation of the image 5.
mermaid ventura 150 TFT x4 - User manual Version 1.1 OSD Functions & Adjustments - continued Function Description 1. 2. H-Position V-Position Moves the location of the OSD menu. 3. OSD Timeout Specifies the time span before the OSD menu disappears. (20 - 200 seconds) 4. Language Specifies the OSD language.
mermaid ventura 150 TFT x4 - User manual Version 1.1 OSD Functions & Adjustments - continued Function Description 1. Dynamic Brightness Smart Inverter Control. This function allows the system to adjust the brightness of the backlight automatically in conjunction with the quantity of the input data. 2. Information Displays the resolution and frequencies of the input. 3. Reset Reset to factory default. 4. Half Tone Changes the colour of the OSD menu.
mermaid ventura 150 TFT x4 - User manual Version 1.1 OSD Functions & Adjustments - continued Function Auto Adjust Description The built-in microprocessor will optimize all display adjustment sets such as video offset gain, position, phase and frequency automatically according to the preprogrammed auto adjustment program. 1) 1) If the microprocessor does not optimize all settings successfully, please use the manual adjustment functions in the OSD menu.
mermaid ventura 150 TFT x4 - User manual Version 1.1 7. Guarantee Terms mermaid ventura 150 TFT x4 is covered by a 1-year send-in warranty. Repair If your mermaid ventura needs repairing, please visit www.mermaid.dk and fill-in the RMA-request. You will then receive an RMA-number, which you must attach outside the monitor packing before you ship your product to mermaid. We will return the product to you within 10 to 14 working days. The guarantee terms set out above apply to Europe only. 8.
mermaid ventura 150 TFT x4 - User manual Version 1.1 9. Troubleshooting If you have troubles using this monitor, please refer to following suggestions for troubleshooting. If you can not rectify the problem yourself, please contact your distributor or place of purchase. Symptom Suggestions Screen is blank Ensure that the power cord is connected and the monitor is on. Ensure that the signal cable is connected firmly to the signal source. Ensure that the signal source is turned on.
mermaid ventura 150 TFT x4 - User manual Version 1.1 Appendix A: Connector Specifications 1 2 Power In 3 Pin no. 1 Function +12 Volt Pin no. 2 Function Gnd Pin no. 3 Function Not used Analog RGB in Pin no. 1 Function Pin no. Function Red 2 Green Pin no. 3 Function Blue 5 GND 6 R_GND 9 NC 10 GND 11 GND H Sync 14 V. Sync 15 SCL 13 Pin no. 7 4 G_GND 8 12 Function NC B_GND SDA 1 1 2 CVBS in Pin no. 1 Function CVBS Pin no. 2 Function Gnd Function Pin no.
mermaid ventura 150 TFT x4 - User manual Version 1.1 Appendix C. Technical Specifications Input Video and sync signal Item Description • Level: 0.
mermaid ventura 150 TFT x4 - User manual Version 1.1 Electrical Parameters Description Min Typ DC power supply 9 12 Supply Current 2.0 Max Unit Volts 2.3 Amp. Additional parameters Description Value Unit Driver Element a-Si TFT active matrix Display Colours 16.7M (true) Colours Display Area 304.1(H) x 228.1(V) mm 15.0 Inch diagonal Number of Pixels 1024 x 768 Pixel Arrangement RGB vertical stripe Pixel Pitch 0.297(H) x 0.
mermaid ventura 150 TFT x4 - User manual Version 1.1 Appendix D: Video Mode Support No Mode Resolution Total Horizontal Frequency Polarity Vertical Frequency Pixel Clock Polarity 1 720x400 900x449 31.47KHz N 70.0 Hz P 28.322MHz 2 640x480 800x525 31.47KHz N 60.0 Hz N 25.175MHz 640x480 864x525 35.00KHz N 66.7 Hz N 30.240MHz 4 640x480 832x520 37.86KHz N 72.8 Hz N 31.500MHz 5 640x480 840x500 37.50KHz N 75,0 Hz N 31.500MHz 6 640x480 832x509 43.27KHz N 85.
mermaid ventura 150 TFT x4 - User manual Version 1.1 Appendix E: Optical Characteristics – ventura 150 TFT The following items were measured under stable conditions. The optical characteristics should be measured in a dark room or equivalent state. * Measuring equipment: TOPCON MB-5A: Contrast Ratio, Luminance of White, Viewing Angle TOPCON BM-7: Response time, Flicker Photo Research PR650: Colour Chromaticity * Ta = 25± 2 0C, VIN = +12Vm fv= 60Hz., Item Symbol Contrast Ratio Min. Typ. Max.
mermaid ventura 150 TFT x4 - User manual Version 1.1 Appendix F: Definition of viewing angle. • • • Viewing angle is defined as the range, measured at a 90° angle from the display surface plane in the centre of the display panel to that angle, where the the contrast value has dropped to 10:1 or 5:1. The exact value is defined by the manufacturer of the panel. See drawing. Viewing angle is defined both vertically and horizontally. The two sets of parameters are rarely common.
mermaid ventura 150 TFT x4 - User manual Version 1.
mermaid ventura 150 TFT x4 - User manual Version 1.
Klingseyvej 15B 2730 Herlev Denmark Phone: +45 44 52 92 00 www.mermaid.