Instructions / Assembly

6
CIRCUIT CONNECTIONS
Receiver
Steel Wire
Mounting
Bracket
White (neutral)
Green or Bare
Copper (ground)
White (“AC IN N”)
Junction Box
Black (live)
Black (“AC IN L”)
White (neutral)
Blue (light)
Green (ground)
White (neutral)
Black (motor)
Blue (light)
Red (for L)
Receiver
Red (for L)
Orange
(for N)
Black (“to motor L”)
Orange
(for N)
Ensure there are no loose wires or connections,
and secure connectors with electrical tape.
3. Connect the 2 colored wires from the remote
receiver to the 2 identically colored lead wires
from the fan motor. Secure each set with the
provided wire nuts.
4. Connect the green or bare copper ground wire
from the junction box to the ground wires from
the ceiling fan. Separate the white and green
connections from the black wire connections,
which should be kept on opposite sides of the
junction box.
Again, ensure that the power has
been cut before working with the
wiring. Use the wire nuts provided
with your fan.
2. Connect the 5 colored wires from the remote
receiver to the 5 identically colored lead wires
from the fan motor. Secure each set with the
provided wire nuts.
1. Insert the receiver into the tray with the receiver
facing the ceiling. For best performance, make
sure the white antenna, on the end of the
receiver, remains extended and not tangled
with any of the electrical wires.