Instructions / Assembly

7
FAN MOTOR INSTALLATION
FAN BLADE INSTALLATION
1. Remove the bolts pre-installed near the top of
the fan motor assembly.
2. Connect the motor assembly to the mounting
bracket by sliding its slots onto the built-in
bolts of the bracket.
3. Secure the motor assembly by replacing and
retightening the removed bolts.
Blade
1. Fit a blade onto one blade arm underneath the fan
motor, aligning their slots with each other.
2. Making sure the blade is straight, attach and tighten 3
plastic washers and blade bolts.
3. Repeat for the remaining blades.
Blade Arm
Motor Bolt
Bracket Bolt
Blade Bolt
Plastic Washer