Specification

12
Fan Blade Installation
1. Place one blade on the fan motor assembly, aligning their holes.
2. Making sure the blade is straight, attach two blade bolts WITHOUT washers to the UPPER
holes.
3. Attach two blade bolts WITH washers to the LOWER holes as shown.
4. Tighten all these bolts completely to secure the blade into place.
5. Repeat for the remaining blades.
Blade Bolt
Blade
Blade Bolt with Washer
Light Installation
1. Remove the bolts from the bottom of the fan motor assembly.
2. Feed the wire plug of the fan motor assembly through the middle of the LED light kit.
3. Connect the wire plug to the socket on the LED light kit.
Wire Plug
Socket