Specification

14
If needed, install the remote control holder onto a wall or any other suitable
at surface using appropriate fasteners. For wood or other thinner and
weaker surfaces, use the provided steel screws and plastic anchors. For
reinforced concrete or similar surfaces, use anchor bolts for best results.
Remote Control Operation
Key Function
Turns the fan o󰀨
When pressed, starts the fan in preset mode, automatically
upshifting or downshifting the speed level in response to
changes in the ambient temperature. When held for five
seconds, mutes or unmutes the control buttons
1–6
Starts the fan at the indicated speed level from low (1) to
high (6)
F/R Reverses the fan’s direction
ON/OFF Turns the LED light on or o󰀨
+ Increases the brightness of the LED light
− Decreases the brightness of the LED light
Toggles the LED light’s color temperature among the
coolest (6500K), medium (4500K), and warmest (3000K)
settings and then adjusts to the lowest brightness level
while retaining the warmest (3000K) color temperature
+ Increases the color temperature of the LED light
− Decreases the color temperature of the LED light
1H Runs the fan for 1 hour and then turns it o󰀨
4H Runs the fan for 4 hours and then turns it o󰀨
8H Runs the fan for 8 hours and then turns it o󰀨
DO NOT press F/R while the fan is turning. Wait for it to stop completely before changing the
direction of its rotation.
This remote operates within a range of 30 feet (10 m). It uses two 1.5V AAA batteries (not
included). If the remote will not be used for a prolonged period, it is recommended to remove the
batteries for better service life.