Specification

Initial Installation

1. Pass the supply wires through the central hole of the mounting bracket.

2. Secure the mounting bracket to your junction box with appropriate fasteners.

For wood or other thinner and weaker ceilings, partially fasten the bracket using the mounting

bolts and star washers. Then, use the mounting screws and at & spring washers to secure the

bracket into place, adding matching plastic anchors (not included) if necessary.

For reinforced concrete or similar ceilings, use anchor bolts (not included).

Star Washer

Flat Washer

Spring Washer

Mounting Screw

Mounting Bolt

Junction Box