Specification

7
9. Partially fasten the downrod by replacing the previously removed locking pin and retaining
clip.
10. Retighten the previously loosened bolts until the downrod is locked into place.
Failure to reattach the locking pin and retighten the Phillips bolts can cause the fan to
fall from the ceiling during operation.
11. Slide down the coupling cover. Place the grommet and canopy onto the downrod’s top and
then slide them to the coupling cover as shown.
12. Replace the downrod’s mount, passing the lead wires and safety cable loop through it.
KCYKCY
1212 33
KCKCYY
1212 33
Retaining Clip
Locking Pin
Canopy
Grommet
Coupling Cover
KCYKCY
1212 33
KCKCYY
1212 33
Mount