Manualshelf

V2 Max and Rehab V2 Max User Manual

ManualsBrandsMerrithew ManualsHealth and Fitness EquipmentRehab V2 Max Reformer Bundle: Rehab V2 Max Reformer, Reformer Box with Footstrap, Padded Platform Extender, Maple Roll-Up Pole, and 1 Exercise DVD
11121314151617181920
Reformer Owner’s Manual
12
Assembly Instructions – Vertical Frame
19
PLUS-STYLE: To use traveling pulleys [53] extend ropes
and detach double-ended swivel spring clips [38] and
soft reformer loops [34]. Pinch end loop of ropes and
insert through the bottom of traveling pulleys. Re-attach
double-ended spring clips and soft reformer loops.
18 Remove receptacle caps [48] with a flat-head screwdriver.
Slide vertical frame into receptacles [72]. For plus-style
models, position pulley system facing carriage. For traditional
models, position highest eyehooks facing carriage. Tighten all
four hex bolts [71]. Attach springs, roll-down bar and safety
chain as illustrated on page 5 [Fig I].
20 To alter the height of traveling pulleys, pull out spring-loaded
stoppers [59]. Shift the traveling pulleys up or down vertical
sliding tracks [52] and release spring-loaded stoppers.
Shake pulleys to confirm they are fully locked into stopper
positions [60].
21 For exercises using arm [69] or leg springs [61], attach
springs to traveling spring hooks [67], and adjust height
in the same way as traveling pulleys. After changing
position, shake spring hooks to confirm they are fully
locked into stopper positions.