User Instructions Part 2

OPERATING INSTRUCTIONS FOR OEM USE ONLY
© 2013 Mertik Maxitrol GmbH & Co. KG, All Rights Reserved.
26 / 28
RANDOM FLAME
AM
ON:
Press
button. Random icon dis-
played.
OFF:
Press
button. Random icon disap-
pears.
NOTE: Mains adapter recommended.
AUXILIARY FEATURE
Upon ignition burner 1 is ON and burner 2 is in the last setting.
1 2
ON
AM
PM
OFF
OFF:
To switch the burner OFF, press the
button (Auxiliary icon disappears).
ON:
To switch a burner ON, press the but-
ton.
NOTE: The latching solenoid valve cannot operate manually. If
the receiver battery runs down it will remain in the last
operating position.
CHILD PROOF
1 2
ON
AM
PM
OFF
ON:
To activate press
and buttons si-
multaneously. Children icon displayed
and the handset is rendered inoper-
able, except for the OFF function.
OFF:
To deactivate press
and buttons
simultaneously. Children icon disap-
pears.
1 2
ON
AM
PM
OFF
1. To continue to program , press
button.
, , displayed, hour
fl ashes.
2. To select hour press
or button.
3. To confi rm press
button. , ,
displayed, minutes fl ash.
4. To select minutes, press
or but-
ton.
5. To confi rm press
button. , ,
displayed, hour fl ashes.
6. To select hour, press
or button.
7. To confi rm press
button. , ,
displayed, minutes fl ash.
8. To select minutes, press
or but-
ton.
9. To confi rm press
button or wait.
NOTE: Programs
and use the same ON and OFF tempera-
tures. Once an ON and/or OFF temperature has been
set, that temperature becomes the new default setting.
CIRCULATING FAN OPERATION
AM
NOTE: SETTING only. Fan is switched
ON automatically when gas
opens. Circulating fan has 4
speed levels from low (1 bar) to
high (4 bars).
SETTING:
1. Press
button and hold until fan
icon fl ashes.
2. Press
button to increase fan speed
and
button to decrease fan speed.
3. To confi rm setting either press
but-
ton or wait (Fan icon displayed).
OFF:
Press
button until all 4 speed level
bars disappear.
LIGHT/DIMMER OPERATION
AM
ON:
Press
button (light icon displayed).
Light is on at preset level.
OFF:
Press
button (light icon disappears).
SETTING:
1. Press
button and hold until light
icon fl ashes.
2. To adjust light between 20…100 %
press
or button.
3. To confi rm setting either press
but-
ton or wait (Light icon displayed).
NOTE: The Light works independently of the Pilot fl ame. If you
want the light ON but no fl ame, press
button.