User's Manual
Table Of Contents
- About This Guide
- Meru Access Points and Radio Switch
- Installing the RS4000
- Installing the AP200
- Installing the AP150
- Specifications
- Regulatory Information
- Channels
- Mounting Bracket Stencils
Installing the RS4000
© 2007 Meru Networks, Inc. Installing the RS4000 23
16. Check that the RS4000 is operating correctly before replacing the ceiling tile to
the ceiling. Verify correct operating using the LEDs, as shown in “Checking LED
Activity.”
Placing and Positioning the Antenna
The RS4000 antenna should be mounted to the wall using the 3" mounting arm within
3' of the RS4000 when using the supplied 3-foot cables or 6' when using the optional
6-foot cables.
Figure 15: RS4000 180
o
Directional Antenna
The antenna mount arm includes two screw-in base types to accommodate either
wall mounts (Figure 16) or ceiling tile rail mounts (Figure 17).
00179
ANT1
ANT2
Direction of Signal Coverage