Installation Guide
Table Of Contents
- About This Guide
- Access Points
- Installing AP300
- Safety Precautions
- Best Practices for an AP300/AP1000 Network
- Unpack the AP300
- Determine Power Requirements
- Installation Requirements
- Install the AP300
- Select a Location
- Attach the Provided Antennas
- Install the Remote Antenna Mount (optional)
- Install External ACC-ANT-MIMO-MNT Antenna with Three Connectors (optional)
- Install Remote ACC-ANT-6ABGN-24 Antenna with Six Connectors (optional)
- Install Antennas With One Connector (optional)
- Install the Access Point
- Check AP300 LED Activity
- Where to Go From Here
- Installing AP320i
- Installing AP332e
- Installing AP332i
- Cautions and Warnings
- Regulatory Information
- Supported PoEs
- Optional External Antennas
Supported Power Over Ethernet Devices for Meru APs
© 2012 Meru Networks, Inc. Supported PoEs 97
Appendix C
Supported PoEs
Supported Power Over Ethernet Devices for
Meru APs
PoE Description
ACC-POE-AT-1AC
Mid-Span High Power pre-802.3at PoE injector (1 Port, 110V/220V AC
input). Ideal for Meru AP300, AP300i, or AP1000; backward compatible
with 802.3af, also works with Meru AP150.
ACC-POE-AT-12AC
Mid-Span 802.3af+ High Power PoE injector (12 Port, 110V/220V AC
input), 19" rack mountable, remote management capable. Ideal for
Meru AP300, AP300i, or AP1000.
ACC-POE1-24AC
Mid-Span 802.3af PoE injector (24 Port, 110V/220V AC input). Ideal for
Meru AP300, AP300i, or AP1000.
ACC-POE1-24ACDC
Mid-Span 802.3af PoE injector (24 Port, 110V/220V AC or 48V DC input) - Note only
supports 20 access points?? Ideal for Meru AP300, AP300i, or AP1000.