Installation Guide
Table Of Contents
- About This Guide
- Access Points
- Installing AP300
- Safety Precautions
- Best Practices for an AP300/AP1000 Network
- Unpack the AP300
- Determine Power Requirements
- Installation Requirements
- Install the AP300
- Select a Location
- Attach the Provided Antennas
- Install the Remote Antenna Mount (optional)
- Install External ACC-ANT-MIMO-MNT Antenna with Three Connectors (optional)
- Install Remote ACC-ANT-6ABGN-24 Antenna with Six Connectors (optional)
- Install Antennas With One Connector (optional)
- Install the Access Point
- Check AP300 LED Activity
- Where to Go From Here
- Installing AP320i
- Installing AP332e
- Installing AP332i
- Cautions and Warnings
- Regulatory Information
- Supported PoEs
- Optional External Antennas
100 Meru Access Point Installation Guide © 2012 Meru Networks, Inc.
Figure 53: Recessed Tile Installation
For 9/16" rectangular profile grids, install the supplied clips in the same manner.
ACC-ANT-O6ABGN-0606-O
Users can install this antenna model on a beam (using one or two clamps, as needed),
or mounted on a pole with the included L-bracket. Examples of each are displayed in
Figure 54 and Figure 55.
Figure 54: Installation on a Beam